--- title: "Reload Column Setting" slug: "reload-column-definitions" updated: 2024-09-10T11:33:19Z published: 2024-09-10T11:33:19Z canonical: "documents.trocco.io/reload-column-definitions" --- > ## Documentation Index > Fetch the complete documentation index at: https://documents.trocco.io/llms.txt > Use this file to discover all available pages before exploring further. # Reload Column Setting ## summary **Column Settings** can be **reloaded** at Data Setting > Column Setting in ETL Configuration STEP 2. By **reloading the Column** Setting, if columns are added or deleted in the Data Source data, or if the query is changed, the Column Setting can be updated to keep up with the changes. Effect on existing settings **Reloading a Column Setting** does not change the existing settings. The settings for each column that were previously set in the Column Setting and the various settings under Data Setting will not be changed. for some Connectors **Reloading Column Setting** is not supported by some Data Source Connectors. ## Flow of Reloading Column Setting Using the CSV file at the time of ETL Configuration creation and a CSV file that has since been modified as an example, this section describes the process of **reloading the Column Setting**. #### CSV file at the time of creating ETL Configuration The following CSV files were targeted for transfer when the ETL Configuration was created. ``` hoge,fuga 1,aaa 2,bbb 3,ccc ``` #### CSV file after creating ETL Configuration After creating ETL Configuration, the data to be transferred was changed to the following CSV file. The fuga column is removed and the piyo column is added. ``` hoge,piyo 1,true 2,false 3,true ``` ### Setup procedure In the above situation, STEP 2 of the relevant ETL Configuration is displayed. 1. Under **Column** Setting **in** Data Setting, click **Reload Column Setting**. ![001-p.png](https://cdn.document360.io/3a3bae1e-f157-487f-8798-01e9d820e760/Images/Documentation/reload-column-definitions-2024-08-29-15-33-0.png) 2. Click **Reload Column Setting**. ![002.png](https://cdn.document360.io/3a3bae1e-f157-487f-8798-01e9d820e760/Images/Documentation/reload-column-definitions-2024-08-29-15-33-1.png) It takes a while to reload. Please wait until loading is complete. 3. Review the differences and click on **Apply changes to Column Setting**. ![reload-column-definitions-2024-08-29-15-33-2](https://cdn.document360.io/3a3bae1e-f157-487f-8798-01e9d820e760/Images/Documentation/reload-column-definitions-2024-08-29-15-33-2.png) 4. Click **Preview Changes**. **Be sure to click here. ** Changes will not take effect until you click **Preview Changes**. ![005-p.png](https://cdn.document360.io/3a3bae1e-f157-487f-8798-01e9d820e760/Images/Documentation/reload-column-definitions-2024-08-29-15-33-3.png) 5. Save ETL Configuration. The ETL Configuration is saved with the Column Setting reloaded.